Tags: #3dprinting #bambu #instructions Links: [[Bambu Labs X1-Carbon]] # Change Nozzle Size on Bambu Labs X1 Carbon ## Instructions 1. Turn printer power off 2. Remove hotend cover (it’s magnetic) 3. Disconnect 3 wires and remove from clip 4. Unscrew 2 hex screws 5. Slide entire hotend assembly down and remove. 6. Slide new hotend assembly in. 7. Screw 2 hex screws 8. Connect 3 wires and secure behind clip 9. Reattach hotend cover 10. Turn Printer power on Source: [Complete hotend assembly | Bambu Lab Wiki](https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly) ## Parts [Complete Hotend Assembly 0.2mm Stainless Steel - X1 Series | Bambu Lab US](https://us.store.bambulab.com/collections/hotends-and-parts/products/complete-hotend-assembly-x1-series?variant=41070436221064) [Complete Hotend Assembly 0.6mm Hardened Steel - X1 Series | Bambu Lab US](https://us.store.bambulab.com/collections/hotends-and-parts/products/complete-hotend-assembly-x1-series?variant=40475104313480)